OUR IRON FILTERS

Specifications:

•  All the filter media you need for the system is included.
• Birm and/or Greensand iron filters are an excellent method of removing high levels of iron manganese and odor from well waters.
• Iron and manganese are oxidized and precipitated instantly by contact with the greensand media.
• The system automatically backwashes and cleans the greensand filter media using potassium permanganate which is easily added on a regular basis to the potassium permanganate solution tank.
• Raw water pH should be 6.8 or greater for best performance although it will work down to a pH of 6.5.
• Chlorine can be fed through the iron filter to increase performance.
• Filter tank is NSF certified one piece seamless polyester construction for long life.
• Max pressure recommended is 100 psi.
• Maximum water temperature recommended 100F.
• Rugged heavy-duty Fleck 2510 backwash control valve features fully adjustable backwash and rinse cycles saving water and allowing maximized performance.
• Time-tested hydraulically balanced piston seal and spacers provide years of trouble-free service.
• Non-corrosive high-tech material construction.
• 12-day time clock can be programmed so the filter backwashes at any time of the day at intervals of every 1, 2, 3, 4, 6 or 12 days.
• The recommended maximum flow rate for best filtration performance is 5.0 gallons per minute but peak flow rates of up to 10 gallons per minute are possible.
• The backwash flow rate is 5.0 gallons per minute.
• If your water has both iron and manganese, or iron and hydrogen sulfide odor, or iron bacteria, this is a very effective and heavy-duty approach to achieve clean odor-free water through out the house!

Common Tank Sizes:

• 9' diameter x 48" height
• 10" diameter x 44" height
• 10" diameter x 54" height
• 12" diameter x 52" height
• 13" diameter x 54" height

WARRANTY:

• 10 years on tank
• 5 years on valve body
• 1 year all other parts and labor